The translator works with the Central
Control Computer by analyzing the command data. If the translator determines that the computer can support 10 discs,
then it will instruct your Central Control Computer to operate in 10 disc mode, otherwise, 6 disc mode will be used.
Your ROWE/AMI distributor can provide you with the EPROM version for 10 disc support.
six disc . . . Rec/Vid/CD V1.0
ten disc . . . Rec/Vid/CD V1.1
ten disc . . . Rec/Vid/CD V1.2
ten disc . . . Rec/Vid/CD V1.4
ten disc . . . Rec/Vid/CD V1.5
Pictured below, the 25-disc CD changer is a Pioneer Model PD-F505 / PD-F605.
The black wire is connected to the "W243" or GND jumper.
The red wire is connected to "+5V".
The blue wire is connected to "R498".
The green wire is connected to "D394"
Click on image to enlarge
Pictured below, the 25-disc CD changer is a Pioneer Model PD-F506 / PD-F606.
The black wire is connected to the "W168" or GND jumper.
The red wire is connected to "+5V".
The blue wire is connected to "R498".
The green wire is connected to "D392"
Click on image to enlarge
Pictured below, the 25-disc CD changer is a Pioneer Model PD-F407 / PD-F507 / PD-F607.
The black wire is connected to the "W249" or GND jumper.
The red wire is connected to "+5V".
The blue wire is connected to "R498".
The green wire is connected to "D394"
Click on image to enlarge
The translators 5-pin keyed connector plugs into P5 of your Central Control Computer.
The price for the CD Changer Translator is $79 plus shipping.
http://www.datasynceng.com/cdtdoc.htm